Technicqll instant gel glue 2g

Cyanoacrylate gel instant adhesive 2 g
Single-component, clear gel-consistency adhesive based on ethyl cyanoacrylate with the highest technical glue parameters, curing under moisture influence. Due to high viscosity and thixotropic properties, it does not run off vertical surfaces and is not absorbed by porous surfaces. Bonds metal, rubber, porcelain, and many plastics very strongly within seconds.
Parameters:
Viscosity: gel
Shear strength: 3.5 MPa
Max. gap filling: 0.25 mm
Temperature range: -55°C to 80°C
Shelf life: 12 months
Features:
Versatile
High bonding speed
Single-component
High viscosity
Applications:
Designed for bonding metal, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum, etc. (except PE, PP, and Teflon). Bonds hard and flexible materials also on vertical surfaces. Also used for bonding metal combinations “metal + rubber, plastics + rubber, paper + plywood + glass,” and o-ring seals.
Benefits:
Bonds all materials except polyolefins, PTFE, silicone rubber
Short repair time
Easy to use
Does not run, drip, or absorb into bonded surfaces
Usage instructions:
1. When opening the tube for the first time, pierce the membrane with the upper part of the cap.
2. The substrate should be clean and degreased (use P-102 or P-959 Technical Degreaser).
3. Apply glue only on one of the bonding surfaces.
4. Do not apply glue in large amounts (the less glue, the stronger the bond).
5. After applying glue, join surfaces and press, holding them depending on the material from 10 to 90 seconds.
6. Clean the applicator from glue residues, unblock the nozzle, and close the tube tightly.